This is the latest recevied telemetry packets stored in our database for station/object W2KGY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | VSolar* | VLight* | CPUTemp* | CPULoad* |
|---|---|---|---|---|---|
| 1765983631 | 24.8 | 32.5 | 0 | 22.5 | 0 |
| 1765981833 | 24.5 | 31.6 | 0 | 21.9 | 0 |
| 1765978229 | 24.4 | 31.2 | 0 | 20.9 | 0 |
| 1765976429 | 24.2 | 26.6 | 0 | 20.3 | 0 |
| 1765972827 | 24 | 20.8 | 0 | 20.3 | 0 |
| 1765972527 | 23.9 | 14.3 | 12.2 | 19.8 | 0 |
| 1765968929 | 24 | 0 | 12.2 | 20.3 | 0 |
| 1765967128 | 24 | 0 | 12.2 | 19.8 | 0 |
| 1765965324 | 24 | 0.1 | 12.2 | 19.8 | 0 |
| 1765963525 | 24 | 0 | 12.2 | 19.3 | 0 |
| 1765961723 | 24.1 | 0 | 12.2 | 19.3 | 0 |
| 1765959922 | 24.1 | 0 | 12.2 | 18.2 | 0 |
| 1765956321 | 24.2 | 0 | 12.2 | 18.2 | 0 |
| 1765954520 | 24.2 | 0 | 12.2 | 18.7 | 0 |
| 1765952719 | 24.2 | 0 | 12.2 | 19.3 | 0 |
| 1765949118 | 24.3 | 0 | 12.2 | 18.7 | 0 |
| 1765947318 | 24.3 | 0 | 12.2 | 18.7 | 0 |
| 1765945520 | 24.3 | 0 | 12.2 | 19.3 | 0 |
| 1765943678 | 24.4 | 0 | 12.2 | 18.7 | 0 |
| 1765940077 | 24.4 | 0.1 | 12.2 | 19.3 | 0 |
| 1765938277 | 24.5 | 0.1 | 12.2 | 19.3 | 0 |
| 1765936478 | 24.5 | 0.1 | 12.2 | 19.3 | 0 |
| 1765934675 | 24.5 | 0.1 | 12.2 | 19.3 | 0 |
| 1765932875 | 24.6 | 0.1 | 12.2 | 20.3 | 0 |
| 1765931074 | 24.6 | 0.1 | 12.2 | 20.3 | 0 |
*Used Equation Coefficients:
VBat: 0, 1, 0
VSolar: 0, 1, 0
VLight: 0, 1, 0
CPUTemp: 0, 1, 0
CPULoad: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)