APRS Track Direct

My position About ☰

reset

HS4LFU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4LFU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1770083513	0 Pkt	-70 dBm	9.02 V
1770082589	0 Pkt	-65 dBm	9.17 V
1770081665	0 Pkt	-65 dBm	9.02 V
1770080740	0 Pkt	-70 dBm	9.02 V
1770079816	0 Pkt	-69 dBm	9.02 V
1770078891	0 Pkt	-68 dBm	9.02 V
1770077967	0 Pkt	-69 dBm	9.02 V
1770077043	0 Pkt	-68 dBm	9.02 V
1770076120	1 Pkt	-69 dBm	9.02 V
1770075195	0 Pkt	-68 dBm	9.02 V
1770074270	0 Pkt	-70 dBm	9.02 V
1770073346	0 Pkt	-68 dBm	9.02 V
1770072422	0 Pkt	-69 dBm	9.04 V
1770071498	0 Pkt	-67 dBm	9.02 V
1770070573	0 Pkt	-67 dBm	9.02 V
1770069649	1 Pkt	-67 dBm	9.02 V
1770068725	0 Pkt	-68 dBm	9.02 V
1770067800	2 Pkt	-67 dBm	9.02 V
1770066876	1 Pkt	-69 dBm	9.02 V
1770065952	0 Pkt	-68 dBm	9.02 V
1770065028	0 Pkt	-68 dBm	9.02 V
1770064103	0 Pkt	-69 dBm	9.02 V
1770063181	0 Pkt	-68 dBm	9.02 V
1770062255	0 Pkt	-68 dBm	9.02 V
1770061331	0 Pkt	-69 dBm	9.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)