This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750120754 | 69 Count | 923 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750118954 | 68 Count | 916 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750117155 | 67 Count | 905 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750115355 | 66 Count | 892 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750113556 | 65 Count | 876 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750111756 | 64 Count | 863 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750109957 | 63 Count | 850 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750108157 | 62 Count | 837 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750106359 | 61 Count | 824 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750104559 | 60 Count | 810 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750102760 | 59 Count | 797 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750100961 | 58 Count | 783 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750099161 | 57 Count | 770 Count | 0 Count | 3.96 VDC | 1.12 VDC |
| 1750097362 | 56 Count | 757 Count | 0 Count | 3.96 VDC | 1.5 VDC |
| 1750095563 | 55 Count | 743 Count | 0 Count | 3.96 VDC | 2.38 VDC |
| 1750093764 | 54 Count | 730 Count | 0 Count | 3.96 VDC | 3.68 VDC |
| 1750091964 | 53 Count | 718 Count | 0 Count | 3.96 VDC | 3.96 VDC |
| 1750090165 | 52 Count | 706 Count | 0 Count | 3.97 VDC | 4.12 VDC |
| 1750088366 | 51 Count | 692 Count | 0 Count | 3.97 VDC | 4.12 VDC |
| 1750086566 | 50 Count | 679 Count | 0 Count | 3.96 VDC | 4.12 VDC |
| 1750084767 | 49 Count | 666 Count | 0 Count | 3.97 VDC | 4.12 VDC |
| 1750082968 | 48 Count | 653 Count | 0 Count | 3.97 VDC | 4.12 VDC |
| 1750081169 | 47 Count | 639 Count | 0 Count | 3.97 VDC | 4.12 VDC |
| 1750077571 | 45 Count | 610 Count | 0 Count | 3.97 VDC | 4.1 VDC |
| 1750075771 | 44 Count | 596 Count | 0 Count | 3.97 VDC | 4.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)