This is the latest recevied telemetry packets stored in our database for station/object NFJN39. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Aussentemperatur* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754165103 | 14.2 Deg.C | 0 | 0 | 0 | 0 |
| 1754164803 | 14.3 Deg.C | 0 | 0 | 0 | 0 |
| 1754164504 | 14.3 Deg.C | 0 | 0 | 0 | 0 |
| 1754164204 | 14.5 Deg.C | 0 | 0 | 0 | 0 |
| 1754163904 | 14.5 Deg.C | 0 | 0 | 0 | 0 |
| 1754163604 | 14.6 Deg.C | 0 | 0 | 0 | 0 |
| 1754163304 | 14.7 Deg.C | 0 | 0 | 0 | 0 |
| 1754163007 | 14.9 Deg.C | 0 | 0 | 0 | 0 |
| 1754162703 | 15 Deg.C | 0 | 0 | 0 | 0 |
| 1754162403 | 15.2 Deg.C | 0 | 0 | 0 | 0 |
| 1754162104 | 15.3 Deg.C | 0 | 0 | 0 | 0 |
| 1754161804 | 15.6 Deg.C | 0 | 0 | 0 | 0 |
| 1754161505 | 15.8 Deg.C | 0 | 0 | 0 | 0 |
| 1754161203 | 15.8 Deg.C | 0 | 0 | 0 | 0 |
| 1754160903 | 15.8 Deg.C | 0 | 0 | 0 | 0 |
| 1754160603 | 15.8 Deg.C | 0 | 0 | 0 | 0 |
| 1754160304 | 15.9 Deg.C | 0 | 0 | 0 | 0 |
| 1754160012 | 15.9 Deg.C | 0 | 0 | 0 | 0 |
| 1754159703 | 15.9 Deg.C | 0 | 0 | 0 | 0 |
| 1754159403 | 15.9 Deg.C | 0 | 0 | 0 | 0 |
| 1754159103 | 16 Deg.C | 0 | 0 | 0 | 0 |
| 1754158803 | 16.1 Deg.C | 0 | 0 | 0 | 0 |
| 1754158503 | 16.1 Deg.C | 0 | 0 | 0 | 0 |
| 1754158203 | 16.2 Deg.C | 0 | 0 | 0 | 0 |
| 1754157903 | 16.2 Deg.C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Aussentemperatur: 0, 0.1, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)