This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762309936 | 12.16 | 12.92 | 0 | 0 | 0 |
| 1762308137 | 12.16 | 13.4 | 0 | 0 | 0 |
| 1762306337 | 12.16 | 14.38 | 0 | 0 | 0 |
| 1762304538 | 12.16 | 15.36 | 0 | 0 | 0 |
| 1762302739 | 12.16 | 16.34 | 0 | 0 | 0 |
| 1762300940 | 12.16 | 17.32 | 0 | 0 | 0 |
| 1762299140 | 12.13 | 18.78 | 0 | 0 | 0 |
| 1762297341 | 12.16 | 20.74 | 0 | 0 | 0 |
| 1762295542 | 12.16 | 20.74 | 0 | 0 | 0 |
| 1762291942 | 12.16 | 22.21 | 0 | 0 | 0 |
| 1762290142 | 12.13 | 21.72 | 0 | 0 | 0 |
| 1762288341 | 12.16 | 21.23 | 0 | 0 | 0 |
| 1762286541 | 12.13 | 20.74 | 0 | 0 | 0 |
| 1762284742 | 12.16 | 20.74 | 0 | 0 | 0 |
| 1762282942 | 12.13 | 20.25 | 0 | 0 | 0 |
| 1762277543 | 12.13 | 19.76 | 0 | 0 | 0 |
| 1762273944 | 12.13 | 18.29 | 0 | 0 | 0 |
| 1762266746 | 12.13 | 13.89 | 0 | 0 | 0 |
| 1762263147 | 12.16 | 10.96 | 0 | 0 | 0 |
| 1762261347 | 12.16 | 10.47 | 0 | 0 | 0 |
| 1762259548 | 12.16 | 9.98 | 0 | 0 | 0 |
| 1762252349 | 12.16 | 11.94 | 0 | 0 | 0 |
| 1762250550 | 12.19 | 12.43 | 0 | 0 | 0 |
| 1762248751 | 12.16 | 13.4 | 0 | 0 | 0 |
| 1762246952 | 12.16 | 13.89 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)