APRS Track Direct

My position About ☰

reset

DB3KE-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3KE-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1836274464	1005.4 hPa	32 C deg	1014.5 hPa	0 C deg
1836274464	1005.4 hPa	32 C deg	1014.5 hPa	0 C deg
1782513449	1005.6 hPa	41.2 C deg	1018.1 hPa	0 C deg
1782511634	1005.4 hPa	41.2 C deg	1017.9 hPa	0 C deg
1782509819	1005.3 hPa	41.1 C deg	1017.8 hPa	0 C deg
1782508004	1004.7 hPa	41.3 C deg	1017.2 hPa	0 C deg
1782506188	1004.5 hPa	41.2 C deg	1017 hPa	0 C deg
1782504373	1004.4 hPa	41.2 C deg	1016.9 hPa	0 C deg
1782502558	1004.5 hPa	41.1 C deg	1017 hPa	0 C deg
1782500743	1004.2 hPa	41.1 C deg	1016.7 hPa	0 C deg
1782498928	1004 hPa	41.1 C deg	1016.5 hPa	0 C deg
1782497113	1003.7 hPa	41.1 C deg	1016.2 hPa	0 C deg
1782495298	1003.8 hPa	41 C deg	1016.3 hPa	0 C deg
1782493483	1003.5 hPa	40.9 C deg	1016 hPa	0 C deg
1782491668	1003.3 hPa	40.8 C deg	1015.8 hPa	0 C deg
1782489853	1003.5 hPa	40.8 C deg	1016 hPa	0 C deg
1782488038	1003.7 hPa	40.7 C deg	1016.2 hPa	0 C deg
1782486223	1003.8 hPa	40.7 C deg	1016.3 hPa	0 C deg
1782484408	1003.8 hPa	40.5 C deg	1016.3 hPa	0 C deg
1782482592	1003.8 hPa	40.5 C deg	1016.3 hPa	0 C deg
1782480777	1003.8 hPa	40.5 C deg	1016.3 hPa	0 C deg
1782478962	1004 hPa	40.4 C deg	1016.5 hPa	0 C deg
1782477147	1004 hPa	40.3 C deg	1016.5 hPa	0 C deg
1782475332	1004.1 hPa	40.2 C deg	1016.6 hPa	0 C deg
1782473517	1004.4 hPa	40.1 C deg	1016.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)