APRS Track Direct

My position About ☰

reset

OZ7DIH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ7DIH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274471	12.48 Volt	10 Pkt	0 Pkt	28 Pcnt
1836273871	12.48 Volt	10 Pkt	10 Pkt	26 Pcnt
1762344984	12.48 Volt	0 Pkt	0 Pkt	83 Pcnt
1762339278	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762334173	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762332674	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762326066	12.48 Volt	10 Pkt	0 Pkt	100 Pcnt
1762320661	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762318859	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762318258	12.48 Volt	0 Pkt	0 Pkt	87 Pcnt
1762315560	12.48 Volt	0 Pkt	0 Pkt	88 Pcnt
1762315253	12.48 Volt	0 Pkt	0 Pkt	88 Pcnt
1762314354	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762309548	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762306547	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762306245	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762304744	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762301140	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762298739	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762295734	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762294833	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762294533	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762275619	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762274416	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt
1762273214	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)