APRS Track Direct

My position About ☰

reset

SR2KG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2KG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Eff*	Eff1h*	Rx1h*	Dg1h*	Vin*
1786724146	14 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786721266	15 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786718386	15 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786715507	15 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786712627	15 Pcnt	100 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786709747	15 Pcnt	100 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786706867	15 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786703987	15 Pcnt	8 Pcnt	0 Pkt	0 Pkt	14.06 Volt
1786701107	15 Pcnt	25 Pcnt	10 Pkt	0 Pkt	14.14 Volt
1786698227	14 Pcnt	100 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786695347	14 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786692467	14 Pcnt	20 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786689587	14 Pcnt	12 Pcnt	10 Pkt	10 Pkt	14.14 Volt
1786686707	14 Pcnt	12 Pcnt	10 Pkt	0 Pkt	14.14 Volt
1786683827	16 Pcnt	20 Pcnt	20 Pkt	0 Pkt	14.14 Volt
1786680947	14 Pcnt	10 Pcnt	0 Pkt	0 Pkt	14.06 Volt
1786678067	15 Pcnt	13 Pcnt	10 Pkt	0 Pkt	14.14 Volt
1786675188	17 Pcnt	8 Pcnt	10 Pkt	0 Pkt	14.06 Volt
1786672308	22 Pcnt	23 Pcnt	20 Pkt	10 Pkt	14.06 Volt
1786670148	24 Pcnt	23 Pcnt	20 Pkt	10 Pkt	14.14 Volt
1786664762	62 Pcnt	6 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786663682	62 Pcnt	4 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786660802	63 Pcnt	1 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786657922	64 Pcnt	0 Pcnt	0 Pkt	0 Pkt	14.14 Volt
1786655042	65 Pcnt	2 Pcnt	0 Pkt	0 Pkt	14.14 Volt

*Used Equation Coefficients:

Eff: 0, 1, 0

Eff1h: 0, 1, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Vin: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)