APRS Track Direct

My position About ☰

reset

DB0JEN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0JEN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1836274331	12.83 Volt	730 Pkt	170 Pkt	67 Pcnt	71 Pcnt
1762274540	13.05 Volt	640 Pkt	110 Pkt	77 Pcnt	69 Pcnt
1762272138	13.13 Volt	580 Pkt	110 Pkt	74 Pcnt	69 Pcnt
1762270936	13.5 Volt	520 Pkt	100 Pkt	72 Pcnt	69 Pcnt
1762269735	14.03 Volt	500 Pkt	120 Pkt	71 Pcnt	69 Pcnt
1762268534	14.33 Volt	490 Pkt	120 Pkt	70 Pcnt	69 Pcnt
1762267333	14.48 Volt	520 Pkt	120 Pkt	70 Pcnt	69 Pcnt
1762266132	14.85 Volt	480 Pkt	100 Pkt	70 Pcnt	69 Pcnt
1762264931	14.85 Volt	440 Pkt	90 Pkt	67 Pcnt	69 Pcnt
1762263729	14.85 Volt	410 Pkt	80 Pkt	67 Pcnt	69 Pcnt
1762262528	14.85 Volt	420 Pkt	90 Pkt	68 Pcnt	69 Pcnt
1762261330	14.85 Volt	410 Pkt	90 Pkt	71 Pcnt	69 Pcnt
1762260126	14.85 Volt	430 Pkt	100 Pkt	71 Pcnt	69 Pcnt
1762257724	14.93 Volt	430 Pkt	90 Pkt	68 Pcnt	69 Pcnt
1762256523	14.85 Volt	430 Pkt	90 Pkt	67 Pcnt	69 Pcnt
1762255321	14.85 Volt	500 Pkt	80 Pkt	68 Pcnt	69 Pcnt
1762254120	14.85 Volt	510 Pkt	80 Pkt	68 Pcnt	69 Pcnt
1762252919	14.85 Volt	480 Pkt	80 Pkt	68 Pcnt	69 Pcnt
1762251719	14.85 Volt	420 Pkt	80 Pkt	68 Pcnt	69 Pcnt
1762250517	14.85 Volt	380 Pkt	90 Pkt	69 Pcnt	69 Pcnt
1762246913	14.85 Volt	420 Pkt	110 Pkt	65 Pcnt	69 Pcnt
1762245712	14.78 Volt	430 Pkt	110 Pkt	65 Pcnt	69 Pcnt
1762244512	14.25 Volt	460 Pkt	130 Pkt	66 Pcnt	69 Pcnt
1762243310	13.95 Volt	440 Pkt	110 Pkt	65 Pcnt	69 Pcnt
1762242109	13.2 Volt	420 Pkt	110 Pkt	65 Pcnt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)