APRS Track Direct

My position About ☰

reset

YM2KAP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KAP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1786730959	12.51 Volt	410 Pkt	210 Pkt	89 Pcnt	80 Pcnt
1786729758	12.8 Volt	420 Pkt	210 Pkt	86 Pcnt	80 Pcnt
1786724953	12.88 Volt	440 Pkt	240 Pkt	82 Pcnt	80 Pcnt
1786724353	12.88 Volt	460 Pkt	250 Pkt	83 Pcnt	80 Pcnt
1786723752	12.95 Volt	470 Pkt	250 Pkt	83 Pcnt	80 Pcnt
1786722551	12.95 Volt	430 Pkt	230 Pkt	80 Pcnt	80 Pcnt
1786720749	12.95 Volt	360 Pkt	200 Pkt	81 Pcnt	80 Pcnt
1786720149	13.02 Volt	350 Pkt	200 Pkt	81 Pcnt	80 Pcnt
1786719551	13.02 Volt	350 Pkt	190 Pkt	81 Pcnt	80 Pcnt
1786717146	13.25 Volt	360 Pkt	210 Pkt	86 Pcnt	80 Pcnt
1786715344	13.39 Volt	370 Pkt	210 Pkt	88 Pcnt	80 Pcnt
1786714143	13.76 Volt	390 Pkt	230 Pkt	87 Pcnt	80 Pcnt
1786712942	13.99 Volt	460 Pkt	250 Pkt	88 Pcnt	80 Pcnt
1786712342	13.76 Volt	480 Pkt	250 Pkt	86 Pcnt	80 Pcnt
1786711741	13.69 Volt	520 Pkt	270 Pkt	85 Pcnt	80 Pcnt
1786710540	14.06 Volt	630 Pkt	300 Pkt	82 Pcnt	80 Pcnt
1786709939	13.91 Volt	650 Pkt	310 Pkt	82 Pcnt	80 Pcnt
1786709338	14.36 Volt	640 Pkt	300 Pkt	81 Pcnt	80 Pcnt
1786708738	13.91 Volt	640 Pkt	310 Pkt	81 Pcnt	80 Pcnt
1786708137	13.84 Volt	640 Pkt	310 Pkt	82 Pcnt	80 Pcnt
1786706936	14.36 Volt	570 Pkt	250 Pkt	84 Pcnt	80 Pcnt
1786706335	14.36 Volt	570 Pkt	250 Pkt	84 Pcnt	80 Pcnt
1786705737	14.36 Volt	580 Pkt	250 Pkt	85 Pcnt	80 Pcnt
1786705134	14.36 Volt	560 Pkt	230 Pkt	84 Pcnt	80 Pcnt
1786704534	14.36 Volt	560 Pkt	230 Pkt	84 Pcnt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)