This is the latest recevied telemetry packets stored in our database for station/object VU2IB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcell* | RSSI* | Light* | Awake* | Value5* |
|---|---|---|---|---|---|
| 1791750783 | 5 Vdc | -59 dBm | 0 lux | 4.2 secs | 0 |
| 1791750722 | 5 Vdc | -59 dBm | 0 lux | 3.8 secs | 0 |
| 1791750660 | 5 Vdc | -58 dBm | 0 lux | 3.3 secs | 0 |
| 1791750598 | 5 Vdc | -59 dBm | 0 lux | 3.4 secs | 0 |
| 1791750537 | 5 Vdc | -59 dBm | 0 lux | 3.8 secs | 0 |
| 1791750477 | 5 Vdc | -60 dBm | 0 lux | 3.8 secs | 0 |
| 1791750416 | 5 Vdc | -58 dBm | 0 lux | 3.7 secs | 0 |
| 1791750354 | 5 Vdc | -57 dBm | 0 lux | 3.8 secs | 0 |
| 1791750292 | 5 Vdc | -58 dBm | 0 lux | 4.3 secs | 0 |
| 1791750232 | 5 Vdc | -56 dBm | 0 lux | 3.9 secs | 0 |
| 1791750169 | 5 Vdc | -58 dBm | 0 lux | 3.7 secs | 0 |
| 1791750108 | 5 Vdc | -56 dBm | 0 lux | 3.8 secs | 0 |
| 1791750047 | 5 Vdc | -59 dBm | 0 lux | 3.3 secs | 0 |
| 1791749985 | 5 Vdc | -58 dBm | 0 lux | 3.8 secs | 0 |
| 1791749927 | 5 Vdc | -59 dBm | 0 lux | 3.7 secs | 0 |
| 1791749863 | 5 Vdc | -59 dBm | 0 lux | 4.4 secs | 0 |
| 1791749802 | 5 Vdc | -61 dBm | 0 lux | 4 secs | 0 |
| 1791749740 | 5 Vdc | -58 dBm | 0 lux | 4.2 secs | 0 |
| 1791749679 | 5 Vdc | -59 dBm | 0 lux | 3.8 secs | 0 |
| 1791749616 | 5 Vdc | -61 dBm | 0 lux | 3.8 secs | 0 |
| 1791749555 | 5 Vdc | -58 dBm | 0 lux | 3.4 secs | 0 |
| 1791749494 | 5 Vdc | -59 dBm | 0 lux | 3.5 secs | 0 |
| 1791749433 | 5 Vdc | -59 dBm | 0 lux | 3.7 secs | 0 |
| 1791749371 | 5 Vdc | -57 dBm | 0 lux | 3.8 secs | 0 |
| 1791749310 | 5 Vdc | -56 dBm | 0 lux | 3.6 secs | 0 |
*Used Equation Coefficients:
Vcell: 0, 0.01, 2.5
RSSI: 0, -1, 0
Light: 1, 0, 0
Awake: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)