APRS Track Direct

My position About ☰

reset

HP1GRE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1GRE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RSSI*	Voltage*
1758236154	10 Pkt	31 dBm	13.74 V
1758234801	8 Pkt	-24 dBm	13.84 V
1758233452	0 Pkt	31 dBm	13.86 V
1758232056	13 Pkt	-25 dBm	13.86 V
1758230705	7 Pkt	-25 dBm	13.84 V
1758229355	6 Pkt	-26 dBm	13.84 V
1758228005	11 Pkt	-25 dBm	13.84 V
1758226654	11 Pkt	-25 dBm	13.84 V
1758225302	12 Pkt	-24 dBm	13.84 V
1758223950	12 Pkt	-25 dBm	13.84 V
1758222599	17 Pkt	-25 dBm	13.84 V
1758221247	19 Pkt	-25 dBm	13.84 V
1758219895	26 Pkt	-24 dBm	13.84 V
1758218543	31 Pkt	-25 dBm	13.84 V
1758217189	22 Pkt	-25 dBm	13.84 V
1758215834	25 Pkt	-25 dBm	13.84 V
1758214482	22 Pkt	-27 dBm	13.84 V
1758213130	18 Pkt	-24 dBm	13.84 V
1758211776	22 Pkt	-26 dBm	13.84 V
1758210424	37 Pkt	-25 dBm	13.84 V
1758209070	37 Pkt	-24 dBm	13.84 V
1758207718	32 Pkt	-26 dBm	13.84 V
1758206364	24 Pkt	-26 dBm	13.86 V
1758205012	14 Pkt	-26 dBm	13.84 V
1758203661	28 Pkt	-24 dBm	13.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)