APRS Track Direct

My position About ☰

reset

F1ZDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F1ZDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1790669600	4.29 VDC	196 pkt/h	84 pkt/h	112 pkt/h
1790668700	4.3 VDC	144 pkt/h	60 pkt/h	84 pkt/h
1790667800	4.3 VDC	112 pkt/h	60 pkt/h	52 pkt/h
1790666899	4.28 VDC	120 pkt/h	56 pkt/h	64 pkt/h
1790665999	4.29 VDC	96 pkt/h	52 pkt/h	44 pkt/h
1790665099	4.29 VDC	100 pkt/h	48 pkt/h	52 pkt/h
1790664199	4.29 VDC	108 pkt/h	48 pkt/h	60 pkt/h
1790663299	4.29 VDC	116 pkt/h	44 pkt/h	72 pkt/h
1790662398	4.3 VDC	128 pkt/h	56 pkt/h	72 pkt/h
1790661498	4.29 VDC	132 pkt/h	76 pkt/h	56 pkt/h
1790660598	4.29 VDC	124 pkt/h	56 pkt/h	68 pkt/h
1790659698	4.28 VDC	148 pkt/h	48 pkt/h	100 pkt/h
1790658798	4.29 VDC	144 pkt/h	56 pkt/h	88 pkt/h
1790657898	4.29 VDC	156 pkt/h	56 pkt/h	100 pkt/h
1790656998	4.28 VDC	116 pkt/h	60 pkt/h	56 pkt/h
1790656097	4.29 VDC	136 pkt/h	56 pkt/h	80 pkt/h
1790655197	4.29 VDC	104 pkt/h	60 pkt/h	44 pkt/h
1790654297	4.29 VDC	132 pkt/h	64 pkt/h	68 pkt/h
1790653397	4.29 VDC	116 pkt/h	48 pkt/h	68 pkt/h
1790652497	4.28 VDC	104 pkt/h	44 pkt/h	60 pkt/h
1790651596	4.3 VDC	116 pkt/h	56 pkt/h	60 pkt/h
1790650696	4.29 VDC	121 pkt/h	59 pkt/h	63 pkt/h
1790649778	4.3 VDC	148 pkt/h	56 pkt/h	92 pkt/h
1790648878	4.3 VDC	160 pkt/h	60 pkt/h	100 pkt/h
1790647977	4.3 VDC	140 pkt/h	64 pkt/h	76 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)