This is the latest recevied telemetry packets stored in our database for station/object WB5PJB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790637011 | 22.1 C | 35.24 % | 0 hPa | 0 | 0 |
| 1790636829 | 22 C | 35.77 % | 0 hPa | 0 | 0 |
| 1790636514 | 21.8 C | 36.2 % | 0 hPa | 0 | 0 |
| 1790636190 | 21.6 C | 37.4 % | 0 hPa | 0 | 0 |
| 1790635976 | 21.4 C | 37.81 % | 1034.75 hPa | 0 | 0 |
| 1790635566 | 21.3 C | 38.81 % | 0 hPa | 0 | 0 |
| 1790635335 | 21.2 C | 39.15 % | 0 hPa | 0 | 0 |
| 1790635072 | 21.2 C | 40.69 % | 819.5 hPa | 0 | 0 |
| 1790602997 | 20.9 C | 34.63 % | 0 hPa | 0 | 0 |
| 1790602785 | 20.8 C | 34.33 % | 0 hPa | 0 | 0 |
| 1790602521 | 20.8 C | 34.47 % | 0 hPa | 0 | 0 |
| 1790602151 | 21 C | 34.49 % | 0 hPa | 0 | 0 |
| 1790601794 | 21.1 C | 35.57 % | 0 hPa | 0 | 0 |
| 1790601302 | 21.6 C | 35.16 % | 0 hPa | 0 | 0 |
| 1790601094 | 21.7 C | 35.9 % | 800.38 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)