APRS Track Direct

My position About ☰

reset

VA3CQC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3CQC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1754168789	0 Load	45 DegC	6737 Mb	5348 Pkt	855 Pkt
1754166989	0.43 Load	45 DegC	6737 Mb	5304 Pkt	785 Pkt
1754165189	0.45 Load	45 DegC	6741 Mb	5278 Pkt	766 Pkt
1754163390	0.02 Load	45 DegC	6746 Mb	5242 Pkt	801 Pkt
1754161590	0.01 Load	45 DegC	6746 Mb	5331 Pkt	833 Pkt
1754159790	0.12 Load	45 DegC	6752 Mb	5314 Pkt	810 Pkt
1754157990	0.03 Load	45 DegC	6736 Mb	5266 Pkt	786 Pkt
1754156190	0.03 Load	45 DegC	6746 Mb	5326 Pkt	825 Pkt
1754154390	0.04 Load	45 DegC	6749 Mb	5338 Pkt	828 Pkt
1754152590	0 Load	45 DegC	6749 Mb	5464 Pkt	1022 Pkt
1754150789	0.02 Load	45 DegC	6760 Mb	5294 Pkt	799 Pkt
1754148990	0.79 Load	45 DegC	6761 Mb	5283 Pkt	818 Pkt
1754147189	0 Load	45 DegC	6747 Mb	5289 Pkt	809 Pkt
1754145389	0.69 Load	45 DegC	6748 Mb	5921 Pkt	826 Pkt
1754143589	0.02 Load	45 DegC	6741 Mb	5942 Pkt	818 Pkt
1754141789	0 Load	45 DegC	6747 Mb	5310 Pkt	836 Pkt
1754139989	0.29 Load	45 DegC	6757 Mb	5249 Pkt	809 Pkt
1754138189	0.02 Load	45 DegC	6757 Mb	5260 Pkt	813 Pkt
1754136389	0 Load	45 DegC	6768 Mb	5248 Pkt	808 Pkt
1754134589	0.74 Load	45 DegC	6755 Mb	5232 Pkt	811 Pkt
1754132789	0.02 Load	45 DegC	6761 Mb	5228 Pkt	796 Pkt
1754130990	0 Load	45 DegC	6744 Mb	5443 Pkt	1013 Pkt
1754129190	0.04 Load	45 DegC	6744 Mb	5226 Pkt	791 Pkt
1754127390	0.06 Load	45 DegC	6744 Mb	5204 Pkt	786 Pkt
1754125590	0 Load	45 DegC	6744 Mb	5154 Pkt	748 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)