This is the latest recevied telemetry packets stored in our database for station/object ON7LSP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762315506 | 0 Count | 447 Count | 0 Count | 0 VDC | 0 VDC |
| 1762314606 | 0 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1762313705 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1762312804 | 0 Count | 424 Count | 0 Count | 0 VDC | 0 VDC |
| 1762311904 | 0 Count | 414 Count | 0 Count | 0 VDC | 0 VDC |
| 1762311004 | 0 Count | 408 Count | 0 Count | 0 VDC | 0 VDC |
| 1762310103 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1762309203 | 0 Count | 393 Count | 0 Count | 0 VDC | 0 VDC |
| 1762308303 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1762307403 | 0 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1762306503 | 0 Count | 373 Count | 0 Count | 0 VDC | 0 VDC |
| 1762305603 | 0 Count | 366 Count | 0 Count | 0 VDC | 0 VDC |
| 1762304703 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1762303803 | 0 Count | 350 Count | 0 Count | 0 VDC | 0 VDC |
| 1762302903 | 0 Count | 343 Count | 0 Count | 0 VDC | 0 VDC |
| 1762302002 | 0 Count | 337 Count | 0 Count | 0 VDC | 0 VDC |
| 1762301102 | 0 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
| 1762300202 | 0 Count | 323 Count | 0 Count | 0 VDC | 0 VDC |
| 1762299302 | 0 Count | 316 Count | 0 Count | 0 VDC | 0 VDC |
| 1762298402 | 0 Count | 309 Count | 0 Count | 0 VDC | 0 VDC |
| 1762297502 | 0 Count | 304 Count | 0 Count | 0 VDC | 0 VDC |
| 1762296602 | 0 Count | 299 Count | 0 Count | 0 VDC | 0 VDC |
| 1762295702 | 0 Count | 292 Count | 0 Count | 0 VDC | 0 VDC |
| 1762294801 | 0 Count | 285 Count | 0 Count | 0 VDC | 0 VDC |
| 1762293901 | 0 Count | 278 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)