APRS Track Direct

My position About ☰

reset

W6SCR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6SCR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	SARBatt*	Solar*	Temp*	Rx1h*
1732286308	12.53 Volt	0.2 Volt	0.4 Volt	39.2 Deg	510 Pkt
1732285107	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	470 Pkt
1732283908	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	430 Pkt
1732282705	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	420 Pkt
1732281504	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	420 Pkt
1732280303	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	410 Pkt
1732279102	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	950 Pkt
1732277900	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	950 Pkt
1732276699	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	980 Pkt
1732275498	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	450 Pkt
1732274297	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	440 Pkt
1732273096	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	430 Pkt
1732271895	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	430 Pkt
1732270693	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	420 Pkt
1732269493	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	430 Pkt
1732268291	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	410 Pkt
1732267090	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	410 Pkt
1732265889	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	410 Pkt
1732264688	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	430 Pkt
1732263487	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	460 Pkt
1732262286	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	460 Pkt
1732261085	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	470 Pkt
1732259883	12.53 Volt	0.2 Volt	0.2 Volt	40.1 Deg	480 Pkt
1732258683	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	460 Pkt
1732257481	12.53 Volt	0.2 Volt	0.2 Volt	39.2 Deg	450 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

SARBatt: 0, 0.1, 0.2

Solar: 0, 0.1, 0.2

Temp: 0, 0.9, -83.2

Rx1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)