This is the latest recevied telemetry packets stored in our database for station/object DB0ROD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX'ed* | DIGI'ed* | Decode* | DecodT* | Value5* |
|---|---|---|---|---|---|
| 1790645261 | 69 Packets | 3 Packets | 75 % | 73 % | 0 |
| 1790641657 | 61 Packets | 3 Packets | 74 % | 73 % | 0 |
| 1790638054 | 31 Packets | 1 Packets | 71 % | 73 % | 0 |
| 1790634451 | 15 Packets | 1 Packets | 82 % | 73 % | 0 |
| 1790630847 | 18 Packets | 3 Packets | 81 % | 73 % | 0 |
| 1790627244 | 15 Packets | 3 Packets | 82 % | 73 % | 0 |
| 1790623640 | 18 Packets | 2 Packets | 81 % | 73 % | 0 |
| 1790620037 | 15 Packets | 2 Packets | 85 % | 73 % | 0 |
| 1790616433 | 13 Packets | 1 Packets | 87 % | 73 % | 0 |
| 1790612830 | 19 Packets | 4 Packets | 88 % | 73 % | 0 |
| 1790609226 | 18 Packets | 3 Packets | 81 % | 73 % | 0 |
| 1790605623 | 18 Packets | 0 Packets | 91 % | 73 % | 0 |
| 1790602020 | 11 Packets | 0 Packets | 90 % | 73 % | 0 |
| 1790598416 | 12 Packets | 1 Packets | 98 % | 73 % | 0 |
| 1790594813 | 13 Packets | 0 Packets | 97 % | 73 % | 0 |
| 1790591209 | 23 Packets | 3 Packets | 92 % | 72 % | 0 |
| 1790587606 | 18 Packets | 3 Packets | 84 % | 72 % | 0 |
| 1790584002 | 10 Packets | 1 Packets | 87 % | 72 % | 0 |
| 1790580399 | 10 Packets | 0 Packets | 93 % | 72 % | 0 |
| 1790576795 | 12 Packets | 1 Packets | 87 % | 72 % | 0 |
| 1790573192 | 9 Packets | 1 Packets | 88 % | 72 % | 0 |
| 1790569588 | 10 Packets | 0 Packets | 95 % | 72 % | 0 |
| 1790565985 | 8 Packets | 0 Packets | 94 % | 72 % | 0 |
| 1790562382 | 11 Packets | 0 Packets | 90 % | 72 % | 0 |
*Used Equation Coefficients:
RX'ed: 0, 1, 0
DIGI'ed: 0, 1, 0
Decode: 0, 1, 0
DecodT: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)