This is the latest recevied telemetry packets stored in our database for station/object 9W2SSO-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762149987 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1762149089 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1762148163 | 5.57 VDC | 0 | 0 | 0 | 0 |
| 1762148148 | 5.56 VDC | 0 | 0 | 0 | 0 |
| 1762147615 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1762147597 | 5.55 VDC | 0 | 0 | 0 | 0 |
| 1762147568 | 5.51 VDC | 0 | 0 | 0 | 0 |
| 1762147543 | 5.53 VDC | 0 | 0 | 0 | 0 |
| 1762147507 | 5.55 VDC | 0 | 0 | 0 | 0 |
| 1762147471 | 5.83 VDC | 0 | 0 | 0 | 0 |
| 1762147427 | 5.57 VDC | 0 | 0 | 0 | 0 |
| 1762146524 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1762145627 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1762145612 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1762145592 | 5.43 VDC | 0 | 0 | 0 | 0 |
| 1762145577 | 5.43 VDC | 0 | 0 | 0 | 0 |
| 1762145516 | 5.56 VDC | 0 | 0 | 0 | 0 |
| 1762145496 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1762145460 | 5.57 VDC | 0 | 0 | 0 | 0 |
| 1762145391 | 5.55 VDC | 0 | 0 | 0 | 0 |
| 1762145145 | 5.54 VDC | 0 | 0 | 0 | 0 |
| 1762145098 | 5.52 VDC | 0 | 0 | 0 | 0 |
| 1762145082 | 5.56 VDC | 0 | 0 | 0 | 0 |
| 1762145049 | 5.52 VDC | 0 | 0 | 0 | 0 |
| 1762144800 | 5.5 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)