This is the latest recevied telemetry packets stored in our database for station/object KB1IKN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274159 | 149 | 166 | 3 | 0 | 0 |
| 1766229265 | 144 | 162 | 26 | 0 | 0 |
| 1766227448 | 144 | 162 | 26 | 0 | 0 |
| 1766225632 | 144 | 162 | 27 | 0 | 0 |
| 1766223816 | 144 | 162 | 27 | 0 | 0 |
| 1766222000 | 144 | 162 | 24 | 0 | 0 |
| 1766220183 | 145 | 161 | 26 | 0 | 0 |
| 1766218367 | 144 | 162 | 25 | 0 | 0 |
| 1766211102 | 145 | 162 | 26 | 0 | 0 |
| 1766209286 | 144 | 162 | 25 | 0 | 0 |
| 1766207469 | 144 | 162 | 29 | 0 | 0 |
| 1766205653 | 144 | 161 | 25 | 0 | 0 |
| 1766203837 | 145 | 162 | 27 | 0 | 0 |
| 1766202020 | 144 | 162 | 27 | 0 | 0 |
| 1766198388 | 144 | 162 | 27 | 0 | 0 |
| 1766196572 | 144 | 162 | 24 | 0 | 0 |
| 1766194755 | 144 | 162 | 27 | 0 | 0 |
| 1766191123 | 144 | 161 | 21 | 0 | 0 |
| 1766189307 | 144 | 161 | 24 | 0 | 0 |
| 1766182041 | 144 | 162 | 27 | 0 | 0 |
| 1766180225 | 144 | 162 | 23 | 0 | 0 |
| 1766178409 | 144 | 162 | 28 | 0 | 0 |
| 1766172961 | 144 | 162 | 27 | 0 | 0 |
| 1766169330 | 144 | 162 | 25 | 0 | 0 |
| 1766163878 | 144 | 162 | 25 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)