This is the latest recevied telemetry packets stored in our database for station/object ER-EA4URC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774109370 | 0 | 592 | 0 | 16 | 0 |
| 1774108770 | 0 | 930 | 0 | 10 | 0 |
| 1774108170 | 0 | 941 | 0 | 10 | 0 |
| 1774107570 | 0 | 927 | 0 | 13 | 0 |
| 1774106970 | 0 | 944 | 0 | 10 | 0 |
| 1774106370 | 0 | 695 | 0 | 10 | 0 |
| 1774105770 | 0 | 832 | 0 | 12 | 0 |
| 1774105170 | 0 | 511 | 0 | 9 | 0 |
| 1774104570 | 0 | 16 | 0 | 3 | 0 |
| 1774103970 | 0 | 65 | 0 | 10 | 0 |
| 1774103370 | 0 | 58 | 0 | 6 | 0 |
| 1774102770 | 0 | 47 | 0 | 7 | 0 |
| 1774102170 | 0 | 28 | 0 | 7 | 0 |
| 1774101570 | 0 | 22 | 0 | 5 | 0 |
| 1774100970 | 0 | 36 | 0 | 7 | 0 |
| 1774100370 | 0 | 59 | 0 | 9 | 0 |
| 1774099770 | 0 | 89 | 0 | 10 | 0 |
| 1774099170 | 0 | 498 | 0 | 14 | 0 |
| 1774098570 | 0 | 92 | 0 | 6 | 0 |
| 1774097970 | 0 | 615 | 0 | 24 | 0 |
| 1774097370 | 0 | 747 | 0 | 31 | 0 |
| 1774096770 | 0 | 611 | 0 | 26 | 0 |
| 1774096170 | 0 | 753 | 0 | 27 | 0 |
| 1774095570 | 0 | 434 | 1 | 18 | 0 |
| 1774094970 | 0 | 523 | 0 | 22 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)