APRS Track Direct

My position About ☰

reset

DB0SON-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SON-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274706	13.95 Volt	640 Pkt	0 Pkt	67 Pcnt
1836274705	13.95 Volt	640 Pkt	0 Pkt	67 Pcnt
1836274555	13.95 Volt	620 Pkt	0 Pkt	67 Pcnt
1836274105	13.95 Volt	680 Pkt	10 Pkt	67 Pcnt
1762274216	13.95 Volt	420 Pkt	0 Pkt	71 Pcnt
1762274215	13.95 Volt	420 Pkt	0 Pkt	71 Pcnt
1762273615	13.95 Volt	470 Pkt	0 Pkt	73 Pcnt
1762273015	13.95 Volt	480 Pkt	0 Pkt	73 Pcnt
1762272416	13.95 Volt	490 Pkt	0 Pkt	73 Pcnt
1762272415	13.95 Volt	490 Pkt	0 Pkt	73 Pcnt
1762271815	13.95 Volt	530 Pkt	0 Pkt	73 Pcnt
1762271215	13.95 Volt	520 Pkt	0 Pkt	73 Pcnt
1762270616	13.95 Volt	520 Pkt	0 Pkt	73 Pcnt
1762270615	13.95 Volt	520 Pkt	0 Pkt	73 Pcnt
1762270015	13.95 Volt	510 Pkt	0 Pkt	72 Pcnt
1762269415	13.95 Volt	480 Pkt	0 Pkt	71 Pcnt
1762268816	13.95 Volt	470 Pkt	0 Pkt	73 Pcnt
1762268815	13.95 Volt	470 Pkt	0 Pkt	73 Pcnt
1762268215	13.95 Volt	450 Pkt	0 Pkt	74 Pcnt
1762267615	13.95 Volt	450 Pkt	0 Pkt	74 Pcnt
1762267016	13.95 Volt	420 Pkt	0 Pkt	74 Pcnt
1762267015	13.95 Volt	420 Pkt	0 Pkt	74 Pcnt
1762266415	13.95 Volt	420 Pkt	0 Pkt	74 Pcnt
1762265815	13.95 Volt	430 Pkt	0 Pkt	75 Pcnt
1762265216	13.95 Volt	450 Pkt	0 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DiRxT: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)