This is the latest recevied telemetry packets stored in our database for station/object F4DVI-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762288199 | 3.98 | 0 | 0 | 0 | 0 |
| 1762287296 | 3.99 | 0 | 0 | 0 | 0 |
| 1762286393 | 4 | 0 | 0 | 0 | 0 |
| 1762285490 | 4.01 | 0 | 0 | 0 | 0 |
| 1762284587 | 4.01 | 0 | 0 | 0 | 0 |
| 1762283684 | 4.02 | 0 | 0 | 0 | 0 |
| 1762282781 | 4.03 | 0 | 0 | 0 | 0 |
| 1762281878 | 4.04 | 0 | 0 | 0 | 0 |
| 1762280975 | 4.04 | 0 | 0 | 0 | 0 |
| 1762280072 | 4.05 | 0 | 0 | 0 | 0 |
| 1762279169 | 4.06 | 0 | 0 | 0 | 0 |
| 1762278266 | 4.07 | 0 | 0 | 0 | 0 |
| 1762277895 | 4.07 | 0 | 0 | 0 | 0 |
| 1762277849 | 4.08 | 0 | 0 | 0 | 0 |
| 1762276992 | 4.09 | 0 | 0 | 0 | 0 |
| 1762276089 | 4.1 | 0 | 0 | 0 | 0 |
| 1762275186 | 4.12 | 0 | 0 | 0 | 0 |
| 1762274283 | 4.15 | 0 | 0 | 0 | 0 |
| 1762273380 | 4.15 | 0 | 0 | 0 | 0 |
| 1762273177 | 4.15 | 0 | 0 | 0 | 0 |
| 1762272274 | 4.15 | 0 | 0 | 0 | 0 |
| 1762271371 | 4.15 | 0 | 0 | 0 | 0 |
| 1762270468 | 4.15 | 0 | 0 | 0 | 0 |
| 1762269565 | 4.15 | 0 | 0 | 0 | 0 |
| 1762268662 | 4.15 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)