This is the latest recevied telemetry packets stored in our database for station/object SP9DLM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | TEMP1* | Dg1h* | Eff1h* | Value5* |
|---|---|---|---|---|---|
| 1732269628 | 13.88 Volt | -64 C | 200 Pkt | 83 Pcnt | 0 |
| 1732266028 | 13.88 Volt | -64 C | 240 Pkt | 85 Pcnt | 0 |
| 1732262427 | 13.88 Volt | -64 C | 250 Pkt | 85 Pcnt | 0 |
| 1732258827 | 13.88 Volt | -64 C | 180 Pkt | 80 Pcnt | 0 |
| 1732258227 | 13.88 Volt | -64 C | 190 Pkt | 79 Pcnt | 0 |
| 1732257627 | 13.88 Volt | -64 C | 180 Pkt | 79 Pcnt | 0 |
| 1732257027 | 13.88 Volt | -64 C | 190 Pkt | 80 Pcnt | 0 |
| 1732256427 | 13.88 Volt | -64 C | 200 Pkt | 81 Pcnt | 0 |
| 1732255827 | 13.88 Volt | -64 C | 210 Pkt | 82 Pcnt | 0 |
| 1732255228 | 13.88 Volt | -64 C | 210 Pkt | 82 Pcnt | 0 |
| 1732255227 | 13.88 Volt | -64 C | 210 Pkt | 82 Pcnt | 0 |
| 1732254627 | 13.8 Volt | -64 C | 190 Pkt | 84 Pcnt | 0 |
| 1732254028 | 13.88 Volt | -64 C | 200 Pkt | 84 Pcnt | 0 |
| 1732253427 | 13.88 Volt | -64 C | 200 Pkt | 84 Pcnt | 0 |
| 1732252827 | 13.8 Volt | -64 C | 190 Pkt | 84 Pcnt | 0 |
| 1732252227 | 13.88 Volt | -64 C | 190 Pkt | 83 Pcnt | 0 |
| 1732251628 | 13.88 Volt | -64 C | 190 Pkt | 84 Pcnt | 0 |
| 1732251627 | 13.88 Volt | -64 C | 190 Pkt | 84 Pcnt | 0 |
| 1732251027 | 13.8 Volt | -64 C | 190 Pkt | 83 Pcnt | 0 |
| 1732250427 | 13.88 Volt | -64 C | 190 Pkt | 83 Pcnt | 0 |
| 1732249827 | 13.88 Volt | -64 C | 190 Pkt | 83 Pcnt | 0 |
| 1732249227 | 13.88 Volt | -64 C | 190 Pkt | 83 Pcnt | 0 |
| 1732248627 | 13.88 Volt | -64 C | 180 Pkt | 83 Pcnt | 0 |
| 1732248028 | 13.88 Volt | -64 C | 180 Pkt | 85 Pcnt | 0 |
| 1732248027 | 13.88 Volt | -64 C | 180 Pkt | 85 Pcnt | 0 |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
TEMP1: 0, 0.5, -64
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)