This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794907595 | 58 Count | 725 Count | 0 Count | 4.08 VDC | 5.08 VDC |
| 1794905795 | 56 Count | 702 Count | 0 Count | 4.08 VDC | 5.08 VDC |
| 1794903995 | 54 Count | 683 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1794902195 | 52 Count | 674 Count | 0 Count | 4.08 VDC | 4.38 VDC |
| 1794900397 | 50 Count | 631 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1794898597 | 48 Count | 602 Count | 0 Count | 4.08 VDC | 3.04 VDC |
| 1794896797 | 46 Count | 562 Count | 0 Count | 4.08 VDC | 1.78 VDC |
| 1794894998 | 44 Count | 511 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794893198 | 42 Count | 486 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794893188 | 37 Count | 486 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794891388 | 35 Count | 465 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794889588 | 33 Count | 441 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794887789 | 31 Count | 418 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794885990 | 29 Count | 396 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794884190 | 27 Count | 363 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794882391 | 25 Count | 323 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794880592 | 23 Count | 291 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794878792 | 21 Count | 254 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794876993 | 19 Count | 227 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794875193 | 17 Count | 192 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794873392 | 15 Count | 149 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794871592 | 13 Count | 122 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794871581 | 8 Count | 122 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1794869783 | 6 Count | 98 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1794867983 | 4 Count | 70 Count | 0 Count | 4.08 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)