This is the latest recevied telemetry packets stored in our database for station/object HS7ZSX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1745055661 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1745053846 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1745052031 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1745050216 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1745048401 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1745046586 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1745044773 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1745042956 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1745041141 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1745039327 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1745037512 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1745035698 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1745033885 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1745032069 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1745030252 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1745028437 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1745026545 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)