This is the latest recevied telemetry packets stored in our database for station/object OK4JL-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762358066 | 37.84 V | 17 | 0 | 0 | 0 |
| 1762358005 | 37.82 V | 17 | 0 | 0 | 0 |
| 1762357945 | 37.8 V | 16 | 0 | 0 | 0 |
| 1762357885 | 37.79 V | 16 | 0 | 0 | 0 |
| 1762357825 | 37.79 V | 14 | 0 | 0 | 0 |
| 1762357765 | 37.74 V | 14 | 0 | 0 | 0 |
| 1762357705 | 37.73 V | 15 | 0 | 0 | 0 |
| 1762357645 | 37.72 V | 16 | 0 | 0 | 0 |
| 1762357585 | 37.71 V | 17 | 0 | 0 | 0 |
| 1762357525 | 37.68 V | 17 | 0 | 0 | 0 |
| 1762357465 | 37.65 V | 16 | 0 | 0 | 0 |
| 1762357405 | 37.65 V | 17 | 0 | 0 | 0 |
| 1762357345 | 37.59 V | 17 | 0 | 0 | 0 |
| 1762357285 | 37.62 V | 16 | 0 | 0 | 0 |
| 1762357225 | 37.58 V | 16 | 0 | 0 | 0 |
| 1762357165 | 37.57 V | 17 | 0 | 0 | 0 |
| 1762357105 | 37.56 V | 18 | 0 | 0 | 0 |
| 1762357045 | 37.53 V | 18 | 0 | 0 | 0 |
| 1762356984 | 37.52 V | 18 | 0 | 0 | 0 |
| 1762356924 | 37.44 V | 17 | 0 | 0 | 0 |
| 1762356864 | 37.47 V | 17 | 0 | 0 | 0 |
| 1762356804 | 37.46 V | 17 | 0 | 0 | 0 |
| 1762356744 | 37.44 V | 17 | 0 | 0 | 0 |
| 1762356684 | 37.42 V | 16 | 0 | 0 | 0 |
| 1762356624 | 37.4 V | 17 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)