This is the latest recevied telemetry packets stored in our database for station/object IQ4HI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX pac* | DIGI* | Effic* | Effic* | Temp* |
|---|---|---|---|---|---|
| 1762336290 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762335090 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762333890 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762333290 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762332690 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762332390 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762331790 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762331490 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762330890 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762330290 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762329690 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762327590 | 1 Pkt | 1 Pkt | 11001 Pkt | 1 PKt | 17665 None |
| 1762327290 | 1 Pkt | 1 Pkt | 11001 Pkt | 1 PKt | 17665 None |
| 1762325790 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762325190 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762324890 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762323690 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762323089 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762322789 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762322489 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762320990 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762319490 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762317690 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762317390 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
| 1762316190 | 1 Pkt | 1 Pkt | 1 Pkt | 1 PKt | 17665 None |
*Used Equation Coefficients:
RX pac: 1, 10, 1
DIGI: 1, 10, 1
Effic: 1, 10, 1
Effic: 1, 10, 1
Temp: 1, 10, 1
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)