APRS Track Direct

My position About ☰

reset

VK3RGR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RGR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1782527102	13.95 Volt	290 Pkt	60 PTT	71 Pcnt
1782523498	13.95 Volt	380 Pkt	70 PTT	71 Pcnt
1782519895	13.95 Volt	400 Pkt	90 PTT	68 Pcnt
1782516291	13.95 Volt	300 Pkt	70 PTT	75 Pcnt
1782512688	13.95 Volt	260 Pkt	50 PTT	68 Pcnt
1782509084	13.95 Volt	170 Pkt	40 PTT	59 Pcnt
1782505481	13.95 Volt	240 Pkt	60 PTT	69 Pcnt
1782501878	13.95 Volt	210 Pkt	50 PTT	64 Pcnt
1782498274	13.95 Volt	240 Pkt	60 PTT	74 Pcnt
1782494671	13.95 Volt	250 Pkt	60 PTT	71 Pcnt
1782491067	13.95 Volt	210 Pkt	50 PTT	67 Pcnt
1782487464	13.95 Volt	240 Pkt	50 PTT	71 Pcnt
1782483861	13.95 Volt	200 Pkt	50 PTT	61 Pcnt
1782480258	13.95 Volt	220 Pkt	50 PTT	68 Pcnt
1782476654	13.8 Volt	190 Pkt	40 PTT	63 Pcnt
1782473050	13.95 Volt	200 Pkt	50 PTT	67 Pcnt
1782469447	13.95 Volt	210 Pkt	50 PTT	67 Pcnt
1782465844	13.95 Volt	190 Pkt	50 PTT	67 Pcnt
1782462240	13.95 Volt	210 Pkt	40 PTT	65 Pcnt
1782458637	13.95 Volt	310 Pkt	50 PTT	67 Pcnt
1782455033	13.95 Volt	300 Pkt	50 PTT	71 Pcnt
1782451430	13.95 Volt	400 Pkt	80 PTT	74 Pcnt
1782447827	13.95 Volt	380 Pkt	70 PTT	74 Pcnt
1782444227	13.95 Volt	430 Pkt	70 PTT	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)