This is the latest recevied telemetry packets stored in our database for station/object PA3GET-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274564 | 416 | 0 | 0 | 0 | 0 |
| 1836274414 | 416 | 0 | 0 | 0 | 0 |
| 1766232630 | 413 | 0 | 0 | 0 | 0 |
| 1766231729 | 413 | 0 | 0 | 0 | 0 |
| 1766230828 | 413 | 0 | 0 | 0 | 0 |
| 1766229927 | 413 | 0 | 0 | 0 | 0 |
| 1766229026 | 412 | 0 | 0 | 0 | 0 |
| 1766228126 | 413 | 0 | 0 | 0 | 0 |
| 1766227225 | 413 | 0 | 0 | 0 | 0 |
| 1766226325 | 413 | 0 | 0 | 0 | 0 |
| 1766225425 | 412 | 0 | 0 | 0 | 0 |
| 1766224524 | 413 | 0 | 0 | 0 | 0 |
| 1766223623 | 413 | 0 | 0 | 0 | 0 |
| 1766222725 | 413 | 0 | 0 | 0 | 0 |
| 1766221821 | 413 | 0 | 0 | 0 | 0 |
| 1766220920 | 412 | 0 | 0 | 0 | 0 |
| 1766220019 | 413 | 0 | 0 | 0 | 0 |
| 1766219118 | 413 | 0 | 0 | 0 | 0 |
| 1766218217 | 413 | 0 | 0 | 0 | 0 |
| 1766217316 | 413 | 0 | 0 | 0 | 0 |
| 1766216416 | 412 | 0 | 0 | 0 | 0 |
| 1766215516 | 413 | 0 | 0 | 0 | 0 |
| 1766214615 | 413 | 0 | 0 | 0 | 0 |
| 1766213714 | 413 | 0 | 0 | 0 | 0 |
| 1766212813 | 413 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)