This is the latest recevied telemetry packets stored in our database for station/object VK4XSS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ign* | speed* | rpm* | gear* | sprt* |
|---|---|---|---|---|---|
| 1762246897 | 3 | 25 | 1550 | 0 | 0 |
| 1762246778 | 3 | 0 | 895 | 0 | 0 |
| 1762246417 | 3 | 75 | 1925 | 0 | 0 |
| 1762246297 | 3 | 74 | 967 | 0 | 0 |
| 1762246178 | 3 | 75 | 2503 | 0 | 0 |
| 1762246056 | 3 | 75 | 1998 | 0 | 0 |
| 1762245938 | 3 | 75 | 1610 | 0 | 0 |
| 1762245818 | 3 | 86 | 2240 | 0 | 0 |
| 1762245816 | 3 | 87 | 2362 | 0 | 0 |
| 1762245697 | 3 | 96 | 2388 | 0 | 0 |
| 1762245578 | 3 | 90 | 2241 | 0 | 0 |
| 1762245577 | 3 | 89 | 2210 | 0 | 0 |
| 1762245457 | 3 | 95 | 2368 | 0 | 0 |
| 1762245337 | 3 | 56 | 2492 | 0 | 0 |
| 1762245336 | 3 | 58 | 1398 | 0 | 0 |
| 1762245217 | 3 | 2 | 690 | 0 | 0 |
| 1762245095 | 3 | 42 | 2986 | 0 | 0 |
| 1762243275 | 0 | 0 | 0 | 4 | 0 |
| 1762243198 | 3 | 0 | 0 | 0 | 0 |
| 1762243078 | 3 | 41 | 1831 | 0 | 0 |
| 1762243035 | 3 | 0 | 641 | 0 | 0 |
| 1762242958 | 3 | 32 | 2034 | 0 | 0 |
| 1762242837 | 3 | 71 | 1074 | 0 | 0 |
| 1762242793 | 3 | 86 | 3217 | 0 | 0 |
| 1762242717 | 3 | 89 | 2366 | 0 | 0 |
*Used Equation Coefficients:
ign: 0, 1, 0
speed: 0, 1, 0
rpm: 0, 1, 0
gear: 0, 1, 0
sprt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)