This is the latest recevied telemetry packets stored in our database for station/object PY5AL-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790637288 | -46 dbm | 3.05 V | 0 | 0 | 0 |
| 1790636088 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790634888 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790633688 | -46 dbm | 3.05 V | 0 | 0 | 0 |
| 1790632488 | -47 dbm | 3.05 V | 0 | 0 | 0 |
| 1790631288 | -47 dbm | 3.04 V | 0 | 0 | 0 |
| 1790630088 | -51 dbm | 3.05 V | 0 | 0 | 0 |
| 1790628888 | -46 dbm | 3.05 V | 0 | 0 | 0 |
| 1790627688 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790626488 | -46 dbm | 3.05 V | 0 | 0 | 0 |
| 1790625288 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790624088 | -47 dbm | 3.05 V | 0 | 0 | 0 |
| 1790622888 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790621688 | -47 dbm | 3.05 V | 0 | 0 | 0 |
| 1790620488 | -47 dbm | 3.05 V | 0 | 0 | 0 |
| 1790619288 | -49 dbm | 3.04 V | 0 | 0 | 0 |
| 1790618088 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790616888 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790615688 | -49 dbm | 3.05 V | 0 | 0 | 0 |
| 1790614488 | -51 dbm | 3.05 V | 0 | 0 | 0 |
| 1790613288 | -47 dbm | 3.05 V | 0 | 0 | 0 |
| 1790612088 | -49 dbm | 3.05 V | 0 | 0 | 0 |
| 1790610888 | -49 dbm | 3.05 V | 0 | 0 | 0 |
| 1790609688 | -48 dbm | 3.05 V | 0 | 0 | 0 |
| 1790608489 | -47 dbm | 3.05 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)