This is the latest recevied telemetry packets stored in our database for station/object IR2UFW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff1h* |
|---|---|---|---|---|---|
| 1794906389 | 46 Pkt | 290 Pkt | 0 Pkt | 0.28 Pcnt | 91 Pcnt |
| 1794906089 | 33 Pkt | 310 Pkt | 1 Pkt | 0.28 Pcnt | 90 Pcnt |
| 1794905788 | 33 Pkt | 300 Pkt | 1 Pkt | 0.28 Pcnt | 91 Pcnt |
| 1794905488 | 47 Pkt | 320 Pkt | 0 Pkt | 0.28 Pcnt | 91 Pcnt |
| 1794905188 | 37 Pkt | 310 Pkt | 0 Pkt | 0.28 Pcnt | 90 Pcnt |
| 1794904887 | 38 Pkt | 310 Pkt | 0 Pkt | 0.28 Pcnt | 91 Pcnt |
| 1794904587 | 42 Pkt | 310 Pkt | 0 Pkt | 0.28 Pcnt | 90 Pcnt |
| 1794904287 | 47 Pkt | 310 Pkt | 0 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794903987 | 49 Pkt | 300 Pkt | 1 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794903686 | 65 Pkt | 300 Pkt | 1 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794903386 | 55 Pkt | 270 Pkt | 0 Pkt | 0.28 Pcnt | 88 Pcnt |
| 1794903086 | 70 Pkt | 270 Pkt | 0 Pkt | 0.28 Pcnt | 88 Pcnt |
| 1794902785 | 55 Pkt | 240 Pkt | 0 Pkt | 0.28 Pcnt | 90 Pcnt |
| 1794902485 | 41 Pkt | 230 Pkt | 0 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794902185 | 35 Pkt | 230 Pkt | 1 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794901885 | 35 Pkt | 240 Pkt | 1 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794901584 | 35 Pkt | 250 Pkt | 0 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794901284 | 46 Pkt | 260 Pkt | 0 Pkt | 0.28 Pcnt | 89 Pcnt |
| 1794900984 | 37 Pkt | 250 Pkt | 0 Pkt | 0.28 Pcnt | 92 Pcnt |
| 1794900683 | 41 Pkt | 270 Pkt | 0 Pkt | 0.28 Pcnt | 93 Pcnt |
| 1794900383 | 22 Pkt | 280 Pkt | 0 Pkt | 0.28 Pcnt | 92 Pcnt |
| 1794900083 | 31 Pkt | 300 Pkt | 1 Pkt | 0.28 Pcnt | 92 Pcnt |
| 1794899783 | 20 Pkt | 320 Pkt | 0 Pkt | 0.28 Pcnt | 91 Pcnt |
| 1794899482 | 35 Pkt | 360 Pkt | 0 Pkt | 0.28 Pcnt | 92 Pcnt |
| 1794899182 | 46 Pkt | 390 Pkt | 0 Pkt | 0.28 Pcnt | 92 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)