This is the latest recevied telemetry packets stored in our database for station/object EL-DB0PTW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274359 | 0 | 8 | 0 | 2 | 0 |
| 1836274209 | 0 | 0 | 0 | 0 | 0 |
| 1762285879 | 0 | 0 | 0 | 0 | 0 |
| 1762285279 | 0 | 0 | 0 | 0 | 0 |
| 1762284679 | 0 | 0 | 0 | 0 | 0 |
| 1762284079 | 0 | 0 | 0 | 0 | 0 |
| 1762283479 | 0 | 0 | 0 | 0 | 0 |
| 1762282879 | 0 | 20 | 0 | 1 | 0 |
| 1762282279 | 0 | 0 | 0 | 0 | 0 |
| 1762281679 | 0 | 0 | 0 | 0 | 0 |
| 1762281079 | 0 | 0 | 0 | 0 | 0 |
| 1762280479 | 0 | 0 | 0 | 0 | 0 |
| 1762279879 | 0 | 0 | 0 | 0 | 0 |
| 1762279279 | 0 | 20 | 0 | 1 | 0 |
| 1762278679 | 0 | 0 | 0 | 0 | 0 |
| 1762278079 | 0 | 0 | 0 | 0 | 0 |
| 1762277479 | 0 | 0 | 0 | 0 | 0 |
| 1762276879 | 0 | 8 | 0 | 2 | 0 |
| 1762276279 | 0 | 0 | 0 | 0 | 0 |
| 1762275679 | 0 | 20 | 0 | 1 | 0 |
| 1762275079 | 0 | 0 | 0 | 0 | 0 |
| 1762274479 | 0 | 0 | 0 | 0 | 0 |
| 1762273879 | 0 | 0 | 0 | 0 | 0 |
| 1762273279 | 0 | 0 | 0 | 0 | 0 |
| 1762272679 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)