This is the latest recevied telemetry packets stored in our database for station/object DL3DCW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Leistung* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786725677 | 4 kW | 0 | 0 | 0 | 0 |
| 1786724777 | 4.3 kW | 0 | 0 | 0 | 0 |
| 1786723877 | 4.5 kW | 0 | 0 | 0 | 0 |
| 1786722977 | 4.6 kW | 0 | 0 | 0 | 0 |
| 1786722077 | 4.8 kW | 0 | 0 | 0 | 0 |
| 1786721177 | 4.8 kW | 0 | 0 | 0 | 0 |
| 1786720277 | 4.6 kW | 0 | 0 | 0 | 0 |
| 1786719377 | 4.9 kW | 0 | 0 | 0 | 0 |
| 1786718477 | 4.9 kW | 0 | 0 | 0 | 0 |
| 1786717577 | 5.1 kW | 0 | 0 | 0 | 0 |
| 1786716677 | 5.3 kW | 0 | 0 | 0 | 0 |
| 1786715777 | 5.5 kW | 0 | 0 | 0 | 0 |
| 1786714877 | 5.8 kW | 0 | 0 | 0 | 0 |
| 1786713977 | 6 kW | 0 | 0 | 0 | 0 |
| 1786713077 | 6.2 kW | 0 | 0 | 0 | 0 |
| 1786712177 | 6.4 kW | 0 | 0 | 0 | 0 |
| 1786711277 | 6.6 kW | 0 | 0 | 0 | 0 |
| 1786710377 | 6.7 kW | 0 | 0 | 0 | 0 |
| 1786709476 | 6.8 kW | 0 | 0 | 0 | 0 |
| 1786708576 | 6.9 kW | 0 | 0 | 0 | 0 |
| 1786707676 | 6.9 kW | 0 | 0 | 0 | 0 |
| 1786706776 | 6.9 kW | 0 | 0 | 0 | 0 |
| 1786705876 | 6.8 kW | 0 | 0 | 0 | 0 |
| 1786704976 | 6.7 kW | 0 | 0 | 0 | 0 |
| 1786704076 | 6.7 kW | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Leistung: 0, 0.1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)