APRS Track Direct

My position About ☰

reset

E24ORD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24ORD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786729717	2 Pkt	0 Pkt	8 Pkt	-87 dBm	0.06 V
1786728284	2 Pkt	10 Pkt	53 Pkt	-89 dBm	0.16 V
1786726294	3 Pkt	12 Pkt	47 Pkt	-89 dBm	0.02 V
1786724306	2 Pkt	14 Pkt	43 Pkt	-88 dBm	0.04 V
1786722317	5 Pkt	15 Pkt	46 Pkt	-87 dBm	0.04 V
1786720328	1 Pkt	5 Pkt	48 Pkt	-89 dBm	0.18 V
1786718339	2 Pkt	5 Pkt	54 Pkt	-90 dBm	0.16 V
1786716350	0 Pkt	0 Pkt	3 Pkt	-88 dBm	0.04 V
1786715001	0 Pkt	13 Pkt	55 Pkt	-89 dBm	0.16 V
1786713016	1 Pkt	14 Pkt	47 Pkt	-91 dBm	0.18 V
1786711022	0 Pkt	12 Pkt	45 Pkt	-88 dBm	0.02 V
1786709033	3 Pkt	14 Pkt	58 Pkt	-91 dBm	0.14 V
1786707043	0 Pkt	13 Pkt	50 Pkt	-92 dBm	0.02 V
1786705054	1 Pkt	16 Pkt	48 Pkt	-91 dBm	0.04 V
1786703064	0 Pkt	10 Pkt	46 Pkt	-88 dBm	0.18 V
1786701075	1 Pkt	18 Pkt	44 Pkt	-89 dBm	0.02 V
1786699088	1 Pkt	27 Pkt	50 Pkt	-89 dBm	0.18 V
1786697097	0 Pkt	13 Pkt	55 Pkt	-88 dBm	0.16 V
1786695109	0 Pkt	15 Pkt	46 Pkt	-90 dBm	0.18 V
1786693120	1 Pkt	16 Pkt	45 Pkt	-90 dBm	0.02 V
1786691130	1 Pkt	10 Pkt	45 Pkt	-89 dBm	0.18 V
1786689141	2 Pkt	16 Pkt	45 Pkt	-91 dBm	0.16 V
1786687152	2 Pkt	16 Pkt	46 Pkt	-91 dBm	0.18 V
1786685163	0 Pkt	15 Pkt	45 Pkt	-89 dBm	0.16 V
1786683174	1 Pkt	14 Pkt	46 Pkt	-87 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)