This is the latest recevied telemetry packets stored in our database for station/object V85AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790652702 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1790651802 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790650901 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1790650001 | 3.69 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790649101 | 3.68 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790648201 | 3.67 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1790647301 | 3.67 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790646400 | 3.67 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790645500 | 3.69 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790644600 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790643700 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790642799 | 3.68 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790641899 | 3.69 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1790640999 | 3.69 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790640099 | 3.69 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790639199 | 3.69 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790638298 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790637398 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1790636498 | 3.68 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790635598 | 3.68 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1790634698 | 3.68 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1790633797 | 3.68 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1790632897 | 3.66 VDC | 4.72 VDC | 0 | 0 | 0 |
| 1790631997 | 3.68 VDC | 4.64 VDC | 0 | 0 | 0 |
| 1790631097 | 3.67 VDC | 4.4 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)