APRS Track Direct

My position About ☰

reset

TA3Q-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3Q-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1790649638	4 Pkt	48 Pkt	0 Pkt	-70 dBm	11.83 V
1790649028	6 Pkt	46 Pkt	0 Pkt	-69 dBm	11.83 V
1790648418	6 Pkt	48 Pkt	1 Pkt	-70 dBm	11.83 V
1790647808	7 Pkt	49 Pkt	0 Pkt	-70 dBm	11.81 V
1790647198	5 Pkt	38 Pkt	0 Pkt	-72 dBm	11.83 V
1790646588	8 Pkt	40 Pkt	1 Pkt	-73 dBm	11.83 V
1790645978	8 Pkt	37 Pkt	0 Pkt	-70 dBm	11.83 V
1790645368	10 Pkt	38 Pkt	0 Pkt	-71 dBm	11.83 V
1790644758	5 Pkt	34 Pkt	0 Pkt	-70 dBm	11.83 V
1790644148	5 Pkt	43 Pkt	1 Pkt	-70 dBm	11.83 V
1790643538	7 Pkt	42 Pkt	0 Pkt	-71 dBm	11.83 V
1790642928	8 Pkt	44 Pkt	1 Pkt	-69 dBm	11.83 V
1790642318	7 Pkt	50 Pkt	0 Pkt	-73 dBm	11.83 V
1790641708	7 Pkt	43 Pkt	0 Pkt	-70 dBm	11.83 V
1790641098	9 Pkt	34 Pkt	1 Pkt	-69 dBm	11.83 V
1790640489	9 Pkt	43 Pkt	0 Pkt	-69 dBm	11.83 V
1790639878	7 Pkt	46 Pkt	0 Pkt	-70 dBm	11.83 V
1790639268	9 Pkt	47 Pkt	0 Pkt	-71 dBm	11.83 V
1790638658	7 Pkt	46 Pkt	0 Pkt	-70 dBm	11.83 V
1790638048	9 Pkt	43 Pkt	3 Pkt	-68 dBm	11.83 V
1790637438	10 Pkt	37 Pkt	0 Pkt	-68 dBm	11.83 V
1790636828	5 Pkt	49 Pkt	0 Pkt	-71 dBm	11.81 V
1790636218	6 Pkt	49 Pkt	0 Pkt	-72 dBm	11.83 V
1790635607	10 Pkt	49 Pkt	0 Pkt	-72 dBm	11.83 V
1790634998	8 Pkt	51 Pkt	0 Pkt	-70 dBm	11.83 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)