This is the latest recevied telemetry packets stored in our database for station/object F1ZUI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tint* | RHint* | Lum.* | Vent* | Value5* |
|---|---|---|---|---|---|
| 1778050714 | 9.57 C | 75 % | 89 % | 18 kmh | 0 |
| 1778050100 | 9.51 C | 75 % | 83 % | 10 kmh | 0 |
| 1778049487 | 9.41 C | 75 % | 85 % | 30 kmh | 0 |
| 1778048873 | 9.34 C | 75 % | 85 % | 25 kmh | 0 |
| 1778048259 | 9.3 C | 75 % | 82 % | 21 kmh | 0 |
| 1778047646 | 9.28 C | 75 % | 78 % | 27 kmh | 0 |
| 1778047032 | 9.27 C | 75 % | 78 % | 25 kmh | 0 |
| 1778046418 | 9.19 C | 75 % | 80 % | 22 kmh | 0 |
| 1778045805 | 9.16 C | 75 % | 78 % | 18 kmh | 0 |
| 1778045191 | 9.13 C | 75 % | 73 % | 18 kmh | 0 |
| 1778044578 | 9.12 C | 75 % | 66 % | 13 kmh | 0 |
| 1778043965 | 9.11 C | 75 % | 55 % | 15 kmh | 0 |
| 1778043353 | 9.06 C | 75 % | 45 % | 27 kmh | 0 |
| 1778042742 | 9.03 C | 75 % | 37 % | 17 kmh | 0 |
| 1778042131 | 9 C | 75 % | 21 % | 18 kmh | 0 |
| 1778041520 | 8.83 C | 75 % | 7 % | 14 kmh | 0 |
| 1778040908 | 8.42 C | 76 % | 4 % | 11 kmh | 0 |
| 1778040297 | 7.52 C | 78 % | 3 % | 10 kmh | 0 |
| 1778038517 | 9.18 C | 74 % | 1 % | 15 kmh | 0 |
| 1778037905 | 9.19 C | 74 % | 1 % | 21 kmh | 0 |
| 1778037294 | 9.22 C | 74 % | 1 % | 18 kmh | 0 |
| 1778036683 | 9.24 C | 74 % | 1 % | 11 kmh | 0 |
| 1778036071 | 9.26 C | 74 % | 1 % | 9 kmh | 0 |
| 1778035460 | 9.22 C | 74 % | 1 % | 19 kmh | 0 |
| 1778034849 | 9.27 C | 73 % | 1 % | 10 kmh | 0 |
*Used Equation Coefficients:
Tint: 0, 1, 0
RHint: 0, 1, 0
Lum.: 0, 1, 0
Vent: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)