This is the latest recevied telemetry packets stored in our database for station/object DF8QL-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774091317 | 0 hPa | 11 C deg | 25 % | 0 hPa | 0 C deg |
| 1774089502 | 0 hPa | 10 C deg | 33 % | 0 hPa | 0 C deg |
| 1774087687 | 0 hPa | 9 C deg | 41 % | 0 hPa | 0 C deg |
| 1774085880 | 0 hPa | 9.1 C deg | 43 % | 0 hPa | 0 C deg |
| 1774084062 | 0 hPa | 8.4 C deg | 47 % | 0 hPa | 0 C deg |
| 1774080430 | 0 hPa | 7.7 C deg | 61 % | 0 hPa | 0 C deg |
| 1774074989 | 0 hPa | 5.8 C deg | 80 % | 0 hPa | 0 C deg |
| 1774073181 | 0 hPa | 4 C deg | 79 % | 0 hPa | 0 C deg |
| 1774069550 | 0 hPa | 4.5 C deg | 78 % | 0 hPa | 0 C deg |
| 1774067741 | 0 hPa | 4.2 C deg | 76 % | 0 hPa | 0 C deg |
| 1774065916 | 0 hPa | 3.3 C deg | 74 % | 0 hPa | 0 C deg |
| 1774062285 | 0 hPa | 4.1 C deg | 70 % | 0 hPa | 0 C deg |
| 1774058659 | 0 hPa | 4.7 C deg | 67 % | 0 hPa | 0 C deg |
| 1774056844 | 0 hPa | 4.8 C deg | 65 % | 0 hPa | 0 C deg |
| 1774053214 | 0 hPa | 5.6 C deg | 53 % | 0 hPa | 0 C deg |
| 1774051403 | 0 hPa | 6.5 C deg | 47 % | 0 hPa | 0 C deg |
| 1774049587 | 0 hPa | 6.7 C deg | 42 % | 0 hPa | 0 C deg |
| 1774047772 | 0 hPa | 6.8 C deg | 41 % | 0 hPa | 0 C deg |
| 1774045961 | 0 hPa | 7.6 C deg | 33 % | 0 hPa | 0 C deg |
| 1774044146 | 0 hPa | 8.5 C deg | 25 % | 0 hPa | 0 C deg |
| 1774042334 | 0 hPa | 8.7 C deg | 20 % | 0 hPa | 0 C deg |
| 1774040525 | 0 hPa | 9.9 C deg | 13 % | 0 hPa | 0 C deg |
| 1774036889 | 0 hPa | 9.8 C deg | 8 % | 0 hPa | 0 C deg |
| 1774035080 | 0 hPa | 10.7 C deg | 10 % | 0 hPa | 0 C deg |
| 1774033262 | 0 hPa | 10.5 C deg | 10 % | 0 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)