APRS Track Direct

My position About ☰

reset

PT7AAA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PT7AAA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1762278315	1 Pkt	-81 dBm	14.23 V
1762277991	0 Pkt	-82 dBm	14.29 V
1762277667	1 Pkt	-78 dBm	13.97 V
1762277338	1 Pkt	-82 dBm	14.44 V
1762277010	0 Pkt	-84 dBm	14.05 V
1762276619	0 Pkt	-83 dBm	14.46 V
1762276295	1 Pkt	-84 dBm	14.54 V
1762275971	0 Pkt	-85 dBm	14.23 V
1762275647	1 Pkt	-81 dBm	14.91 V
1762275323	0 Pkt	-75 dBm	6.07 V
1762274999	1 Pkt	-82 dBm	6.01 V
1762274675	0 Pkt	-81 dBm	6.15 V
1762274351	1 Pkt	-81 dBm	6.17 V
1762274026	0 Pkt	-82 dBm	6.5 V
1762273702	1 Pkt	-83 dBm	6.42 V
1762273378	1 Pkt	-84 dBm	6.56 V
1762273054	0 Pkt	-83 dBm	6.95 V
1762272729	1 Pkt	-82 dBm	6.75 V
1762272405	0 Pkt	-83 dBm	7.32 V
1762272081	1 Pkt	-86 dBm	7.28 V
1762271758	0 Pkt	-86 dBm	6.56 V
1762271433	1 Pkt	-86 dBm	7.44 V
1762271109	0 Pkt	-83 dBm	7.65 V
1762270786	1 Pkt	-84 dBm	7.55 V
1762270462	0 Pkt	-85 dBm	7.51 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)