This is the latest recevied telemetry packets stored in our database for station/object WA0TQG-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | HS temp* | 2Mtemp* | RFtem* | Error* | Warn* |
|---|---|---|---|---|---|
| 1763680573 | 31 DegC | 34 DegC | 42 DegC | 0 | 0 |
| 1763680566 | 31 DegC | 34 DegC | 42 DegC | 0 | 0 |
| 1763680009 | 29 DegC | 34 DegC | 39 DegC | 0 | 0 |
| 1763679982 | 27 DegC | 34 DegC | 39 DegC | 0 | 0 |
| 1763679790 | 29 DegC | 34 DegC | 43 DegC | 0 | 0 |
| 1763679544 | 33 DegC | 34 DegC | 43 DegC | 0 | 0 |
| 1763678942 | 32 DegC | 33 DegC | 42 DegC | 0 | 0 |
| 1763678340 | 32 DegC | 33 DegC | 41 DegC | 0 | 0 |
| 1763677738 | 30 DegC | 32 DegC | 39 DegC | 0 | 0 |
| 1763677731 | 30 DegC | 31 DegC | 39 DegC | 0 | 0 |
| 1763677584 | 31 DegC | 31 DegC | 40 DegC | 0 | 0 |
| 1763677578 | 31 DegC | 31 DegC | 40 DegC | 0 | 0 |
| 1763677079 | 30 DegC | 30 DegC | 37 DegC | 0 | 0 |
| 1763677073 | 29 DegC | 30 DegC | 37 DegC | 0 | 0 |
| 1763677044 | 29 DegC | 30 DegC | 37 DegC | 0 | 0 |
| 1763676442 | 28 DegC | 28 DegC | 36 DegC | 0 | 0 |
| 1763676436 | 27 DegC | 28 DegC | 36 DegC | 0 | 0 |
| 1763676069 | 23 DegC | 28 DegC | 32 DegC | 0 | 0 |
| 1763676062 | 22 DegC | 28 DegC | 32 DegC | 0 | 0 |
| 1763676048 | 22 DegC | 27 DegC | 32 DegC | 0 | 0 |
| 1763676040 | 22 DegC | 28 DegC | 32 DegC | 0 | 0 |
| 1763676012 | 21 DegC | 28 DegC | 32 DegC | 0 | 0 |
| 1763675996 | 21 DegC | 27 DegC | 31 DegC | 0 | 0 |
| 1763675940 | 20 DegC | 27 DegC | 32 DegC | 0 | 0 |
*Used Equation Coefficients:
HS temp: 0, 1, 0
2Mtemp: 0, 1, 0
RFtem: 0, 1, 0
Error: 0, 1, 0
Warn: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)