This is the latest recevied telemetry packets stored in our database for station/object OE3XWJ-93. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792141567 | 174.7 cm | 10.8 °C | 13.9 V | 20 dB | 0 |
| 1792141292 | 174.3 cm | 10.8 °C | 13.9 V | 20 dB | 0 |
| 1792140987 | 173.9 cm | 10.7 °C | 13.9 V | 20 dB | 0 |
| 1792140690 | 173.7 cm | 10.7 °C | 13.9 V | 20 dB | 0 |
| 1792140379 | 173.5 cm | 10.7 °C | 13.9 V | 20 dB | 0 |
| 1792139763 | 173.5 cm | 10.6 °C | 13.9 V | 20 dB | 0 |
| 1792139466 | 173.5 cm | 10.6 °C | 13.9 V | 20 dB | 0 |
| 1792138585 | 173.6 cm | 10.5 °C | 13.9 V | 20 dB | 0 |
| 1792137964 | 173.7 cm | 10.4 °C | 13.9 V | 20 dB | 0 |
| 1792137673 | 173.7 cm | 10.4 °C | 13.9 V | 20 dB | 0 |
| 1792137067 | 174 cm | 10.4 °C | 14 V | 20 dB | 0 |
| 1792136753 | 174 cm | 10.3 °C | 14 V | 20 dB | 0 |
| 1792136461 | 174.1 cm | 10.3 °C | 14 V | 20 dB | 0 |
| 1792136220 | 174.2 cm | 10.3 °C | 14 V | 20 dB | 0 |
| 1792136213 | 174.3 cm | 10.3 °C | 14 V | 20 dB | 0 |
| 1792135013 | 174.7 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792134668 | 174.8 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792134369 | 174.9 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792134136 | 174.9 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792133471 | 174.9 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792132897 | 174.9 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792132635 | 174.8 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792132277 | 174.5 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792131970 | 174.4 cm | 10.2 °C | 14 V | 20 dB | 0 |
| 1792131665 | 174.2 cm | 10.2 °C | 14 V | 20 dB | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)