APRS Track Direct

My position About ☰

reset

DJ3RT-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ3RT-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	Temp.out*
1780186846	970.2 hPa	20.8 C deg	46 %	14.4 C deg
1780185037	970.5 hPa	20.9 C deg	46.1 %	14.8 C deg
1780183216	970.7 hPa	20.9 C deg	46.1 %	15.7 C deg
1780181402	970.8 hPa	21 C deg	45.9 %	15.8 C deg
1780179586	971 hPa	21 C deg	46.1 %	15.8 C deg
1780177771	971.2 hPa	21.1 C deg	46.4 %	15.4 C deg
1780175956	971.2 hPa	21.1 C deg	46.3 %	15.9 C deg
1780174141	971.2 hPa	21.2 C deg	46.4 %	15.5 C deg
1780172326	971.3 hPa	21.3 C deg	46.6 %	15.8 C deg
1780170511	971.3 hPa	21.3 C deg	46.7 %	16.1 C deg
1780168696	971.2 hPa	21.3 C deg	47.1 %	16.4 C deg
1780166880	971.2 hPa	21.4 C deg	47.1 %	17 C deg
1780165065	971.2 hPa	21.5 C deg	46.5 %	18.2 C deg
1780163265	971 hPa	21.5 C deg	46.1 %	18.8 C deg
1780161435	971.2 hPa	21.5 C deg	45.4 %	20.9 C deg
1780159620	971.4 hPa	21.3 C deg	43.9 %	18.3 C deg
1780157805	971.5 hPa	21.2 C deg	43.9 %	16.9 C deg
1780155990	971.8 hPa	21.2 C deg	43.7 %	16.5 C deg
1780154175	972.5 hPa	21.3 C deg	43.8 %	17.4 C deg
1780152360	970 hPa	21.5 C deg	42.7 %	26.4 C deg
1780150545	970.1 hPa	21.5 C deg	42.1 %	29.6 C deg
1780148729	971 hPa	21.4 C deg	42.2 %	29.8 C deg
1780146914	971.1 hPa	21.2 C deg	42.5 %	29.1 C deg
1780145099	971.7 hPa	21.1 C deg	42.5 %	28 C deg
1780143284	972 hPa	21.1 C deg	42.7 %	27.2 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)