This is the latest recevied telemetry packets stored in our database for station/object HS9LWR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PM1.0* | PM2.5* | PM10* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1758183425 | 2 ug/m3 | 3 ug/m3 | 4 ug/m3 | -61 dBm | 5.87 V |
| 1758182803 | 3 ug/m3 | 4 ug/m3 | 4 ug/m3 | -61 dBm | 6.71 V |
| 1758182180 | 1 ug/m3 | 2 ug/m3 | 2 ug/m3 | -61 dBm | 7.69 V |
| 1758181558 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -60 dBm | 8.12 V |
| 1758180936 | 1 ug/m3 | 2 ug/m3 | 3 ug/m3 | -61 dBm | 8.47 V |
| 1758180314 | 2 ug/m3 | 2 ug/m3 | 2 ug/m3 | -61 dBm | 8.33 V |
| 1758179691 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -61 dBm | 8.33 V |
| 1758179069 | 2 ug/m3 | 4 ug/m3 | 4 ug/m3 | -61 dBm | 8 V |
| 1758178447 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -61 dBm | 8 V |
| 1758177825 | 2 ug/m3 | 2 ug/m3 | 2 ug/m3 | -61 dBm | 8.24 V |
| 1758177202 | 1 ug/m3 | 1 ug/m3 | 1 ug/m3 | -62 dBm | 8.74 V |
| 1758176580 | 1 ug/m3 | 1 ug/m3 | 1 ug/m3 | -61 dBm | 9.31 V |
| 1758175958 | 1 ug/m3 | 1 ug/m3 | 1 ug/m3 | -61 dBm | 9.04 V |
*Used Equation Coefficients:
PM1.0: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)