This is the latest recevied telemetry packets stored in our database for station/object DO9HM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770101158 | 0.4 deg C | 84.8 % | 1003.4 hPa | 0 | 0 |
| 1770100253 | 0.4 deg C | 84.7 % | 1003.4 hPa | 0 | 0 |
| 1770099356 | 0.4 deg C | 84.7 % | 1003.4 hPa | 0 | 0 |
| 1770098450 | 0.3 deg C | 84.7 % | 1003.6 hPa | 0 | 0 |
| 1770097702 | 0.2 deg C | 84.8 % | 1003.7 hPa | 0 | 0 |
| 1770096792 | 0 deg C | 85.4 % | 1003.8 hPa | 0 | 0 |
| 1770062271 | -1.3 deg C | 83.1 % | 1006.1 hPa | 0 | 0 |
| 1770061374 | -1.2 deg C | 83 % | 1005.9 hPa | 0 | 0 |
| 1770060473 | -1.1 deg C | 82.5 % | 1005.8 hPa | 0 | 0 |
| 1770058676 | -0.8 deg C | 81.8 % | 1005.9 hPa | 0 | 0 |
| 1770057776 | -0.7 deg C | 81.4 % | 1006.1 hPa | 0 | 0 |
| 1770056880 | -0.7 deg C | 81.1 % | 1006.1 hPa | 0 | 0 |
| 1770055985 | -0.7 deg C | 81.2 % | 1006 hPa | 0 | 0 |
| 1770055087 | -0.6 deg C | 80.9 % | 1006.1 hPa | 0 | 0 |
| 1770054189 | -0.6 deg C | 80.8 % | 1006.1 hPa | 0 | 0 |
| 1770053285 | -0.5 deg C | 80.2 % | 1006.2 hPa | 0 | 0 |
| 1770052388 | -0.4 deg C | 80.3 % | 1006.1 hPa | 0 | 0 |
| 1770050590 | -0.6 deg C | 79.7 % | 1005.9 hPa | 0 | 0 |
| 1770049685 | -0.4 deg C | 78.9 % | 1005.6 hPa | 0 | 0 |
| 1770048788 | -0.2 deg C | 78.8 % | 1005.6 hPa | 0 | 0 |
| 1770047883 | 0.1 deg C | 78.1 % | 1005.5 hPa | 0 | 0 |
| 1770046988 | 0.3 deg C | 77.9 % | 1005.4 hPa | 0 | 0 |
| 1770046091 | 0.4 deg C | 77.5 % | 1005.5 hPa | 0 | 0 |
| 1770045189 | 0.7 deg C | 76.8 % | 1005.2 hPa | 0 | 0 |
| 1770044286 | 0.9 deg C | 76.3 % | 1005.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)