This is the latest recevied telemetry packets stored in our database for station/object IR2DG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
|---|---|---|---|---|---|
| 1792142084 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 100 Pcnt |
| 1792141784 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792141484 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792141183 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792140883 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792140583 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792140283 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792139982 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792139682 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792139382 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 33 Pcnt |
| 1792139082 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792138781 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792138481 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792138181 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792137880 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792137580 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792137280 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792136979 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792136679 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792136379 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792136079 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 66 Pcnt |
| 1792135778 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792135478 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792135178 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
| 1792134877 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 50 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)