This is the latest recevied telemetry packets stored in our database for station/object KB9PFM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274238 | 129 | 28 | 24 | 21 | 48 |
| 1762334950 | 139 | 24 | 22 | 20 | 48 |
| 1762333149 | 139 | 24 | 22 | 20 | 48 |
| 1762331349 | 139 | 24 | 22 | 20 | 48 |
| 1762329549 | 139 | 24 | 22 | 20 | 48 |
| 1762327749 | 139 | 24 | 22 | 20 | 48 |
| 1762325949 | 139 | 24 | 22 | 20 | 48 |
| 1762324148 | 139 | 24 | 22 | 20 | 48 |
| 1762322349 | 139 | 24 | 22 | 20 | 48 |
| 1762320549 | 139 | 24 | 22 | 20 | 48 |
| 1762318749 | 139 | 24 | 22 | 20 | 48 |
| 1762316952 | 139 | 24 | 22 | 20 | 48 |
| 1762315149 | 139 | 24 | 22 | 20 | 48 |
| 1762313349 | 139 | 24 | 22 | 20 | 48 |
| 1762311549 | 139 | 24 | 22 | 20 | 48 |
| 1762309749 | 139 | 24 | 22 | 20 | 48 |
| 1762307950 | 139 | 25 | 22 | 20 | 48 |
| 1762306148 | 139 | 25 | 22 | 20 | 48 |
| 1762304350 | 139 | 24 | 22 | 20 | 48 |
| 1762302549 | 139 | 25 | 22 | 20 | 48 |
| 1762298950 | 139 | 25 | 22 | 20 | 48 |
| 1762297150 | 139 | 25 | 22 | 20 | 48 |
| 1762295350 | 139 | 25 | 22 | 20 | 49 |
| 1762293550 | 139 | 25 | 22 | 20 | 48 |
| 1762291750 | 139 | 25 | 22 | 20 | 49 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)