APRS Track Direct

My position About ☰

reset

OK1CMJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1CMJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	live*	Temp_core*
1790649633	6 Pkts	6 Pkts	61 min.	53.33 C
1790648732	4 Pkts	4 Pkts	60 min.	53.33 C
1790647831	6 Pkts	6 Pkts	59 min.	53.33 C
1790646930	5 Pkts	5 Pkts	58 min.	53.33 C
1790646029	6 Pkts	6 Pkts	57 min.	53.33 C
1790645128	5 Pkts	5 Pkts	56 min.	51.67 C
1790644227	6 Pkts	6 Pkts	55 min.	53.33 C
1790643326	5 Pkts	5 Pkts	54 min.	53.33 C
1790642425	5 Pkts	5 Pkts	53 min.	53.33 C
1790641524	5 Pkts	5 Pkts	52 min.	53.33 C
1790640623	5 Pkts	5 Pkts	51 min.	53.33 C
1790639722	6 Pkts	6 Pkts	50 min.	53.33 C
1790638821	5 Pkts	5 Pkts	49 min.	53.33 C
1790637920	4 Pkts	4 Pkts	48 min.	53.33 C
1790637020	5 Pkts	5 Pkts	47 min.	53.33 C
1790636119	5 Pkts	5 Pkts	46 min.	53.33 C
1790635218	5 Pkts	5 Pkts	45 min.	52.22 C
1790634317	4 Pkts	4 Pkts	44 min.	53.33 C
1790633416	5 Pkts	5 Pkts	43 min.	52.78 C
1790632515	5 Pkts	5 Pkts	42 min.	53.33 C
1790631614	6 Pkts	6 Pkts	41 min.	53.33 C
1790630713	4 Pkts	4 Pkts	40 min.	52.22 C
1790629812	6 Pkts	6 Pkts	39 min.	53.33 C
1790628911	5 Pkts	5 Pkts	38 min.	53.33 C
1790628010	6 Pkts	6 Pkts	37 min.	53.33 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)