This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274224 | 3.93 VDC | 1.22 VDC | 0 | 0 | 0 |
| 1774479898 | 3.9 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1774476897 | 3.91 VDC | 1.16 VDC | 0 | 0 | 0 |
| 1774473897 | 3.88 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1774470897 | 3.9 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1774467897 | 3.92 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1774464897 | 3.94 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1774458897 | 4.03 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1774455897 | 4 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1774452896 | 4.02 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1774449896 | 4.09 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774443896 | 4.18 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774440896 | 4.22 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1774437896 | 4.17 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1774434896 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1774431896 | 4.14 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1774428896 | 4.11 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1774425895 | 4.09 VDC | 2.92 VDC | 0 | 0 | 0 |
| 1774422895 | 3.95 VDC | 1.24 VDC | 0 | 0 | 0 |
| 1774419895 | 3.85 VDC | 1.88 VDC | 0 | 0 | 0 |
| 1774416895 | 3.74 VDC | 1.26 VDC | 0 | 0 | 0 |
| 1774410895 | 3.77 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1774407895 | 3.79 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1774404895 | 3.85 VDC | 1.26 VDC | 0 | 0 | 0 |
| 1774401895 | 3.81 VDC | 0.9 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)